Making A Daisy Chain - BenQ PL460 Installation Handbook

Making a daisy chain

Once you have installed the video wall, you are ready to connect all displays serially as a daisy
chain for playback or centralized management.
Follow the steps below to form a daisy chain, and refer to the mentioned sections for more
information.
In this chapter, illustrations of 4 daisy chained displays are for your reference only. You can connect more displays
if needed, as long as it is within the limit of each daisy chain to ensure picture quality. See
chained displays on page 29
1. Install the video wall. Follow the instructions in
Video wall installation guide on page
2. Connect the video source (e.g. computer) and
loop all displays using the required cables. See
Cable connections on page 27
extension guide on page 9
information.
3. Set the horizontal and vertical position of the
display wall matrix. This helps your computer
identify how many displays are connected and
how to display the image. See
display position on page 30
information.
4. Set the ID number of each display for video wall
management. See
each display: PL460/PH460/PL550/PH550 on
page 33 for more information.
26 Video wall installation guide
for more information.
20.
and Cable
for more
Setting the
for more
Setting the ID number of
Number of daisy
Y
1
3
X
2
4