Notes On Using The Remote Control - BenQ 9H.F6GPK.NA4 Installation Handbook

• Do not install near any heat source such as radiators, heat registers, stoves, other apparatus
(including amplifiers) that produce heat or put the unit exposed to direct spotlight or sunlight.
• It is highly UNRECOMMENDED to install products in moving vehicles as there is high risk for
breaking the internal hanging-panel films in the long run.
• It is highly UNRECOMMENDED to install products in environments with excessive foreign
particles floating in the air such as open kitchen. Special countermeasures must be taken to
seal the unit completely (leaving some opening for heat dissipation) to minimize the effect of
foreign air particles.

Notes on using the remote control

Point and aim the top front of the remote control directly at the display's remote control
sensor window when you press the buttons. Do not let the remote control become wet or
place it in humid environments (like bathrooms).
8 Display installation guide
8M
30° 30°
When using the remote control, confirm there is no
object between the remote control and the remote
sensor of the product.
Operate the remote control from a location closer to
the display's remote control sensor window. Adjust the
distance between the remote control and the display.
Straight-line distance: 8 meters
Transmit angle: ± 30°
The sensor window's position may vary by models.