Table of Contents
Advertisement
www.glp.de
• Before applying power to the product, ensure that the moving head can move
through its full range without risk of collision. Allow a minimum center-to-center
distance of 600 mm / 23.6 in. between fixtures.
• Check that all covers and rigging hardware items are secure.
• Do not operate the product with missing or damaged covers, shields or any optical
component.
• Restrict access below the work area and work from a stable platform whenever
installing, servicing or moving the product.
• If the product becomes damaged, stop using it immediately and disconnect it from
power. Do not attempt to use a product that is obviously damaged.
• Do not modify the product in any way not described in this user manual.
• Install genuine GLP parts only.
• If at any time you see that the product does not conform with one or more of the
above safety requirements, disconnect the product from power and secure the
affected area until the fixture is installed safely.
8
GLP® impression E350
User Manual Rev. A
Advertisement
Table of Contents
