Table of Contents
Advertisement
www.glp.de
26
FX1 selection
27
FX1 adjustment
* Move from zero and hold value for 3 seconds to apply
** Move from zero and hold value for 5 seconds to apply
Notes:
Percentage values are calculated by dividing DMX values by 2.56 and rounding to the
nearest 0.1%.
To apply a command on Channel 25 (Special / Control), start at a value of zero, then
move to the required value and hold it for the required time (e.g. 3 seconds). If you
move to the required value from any other value than zero, the command will not be
applied.
To adjust the PWM frequency using the Special / Control channel, start at a value of
zero, move to the required value and hold it for at least 5 seconds.
Default settings are written in bold type.
34
No FX
Chaser 1-2-3-4-3-2-1
Crossfade 1-2-3-4-3-2-1
Chaser 1+2 – 3+4
Crossfade 1+2 – 3+4
Chaser 1+4 – 2+3
Crossfade 1+4 – 2+3
Chaser random
Crossfade random
No function
FX1 speed slow – fast
GLP® impression E350
0 – 10
0
0 – 3.9%
11 – 14
4.3 – 5.5%
15 – 18
5.9 – 7.1%
19 – 22
7.5 – 8.6%
23 – 26
9 – 10.2%
27 – 30
10.6 – 11.8%
31 – 34
12.2 – 13.3%
35 – 38
13.7 – 14.9%
39 – 42
15.3 – 16.5%
43 – 255
16.9 – 100%
0 – 255
0
0 – 100%
User Manual Rev. A
Snap
Fade
Advertisement
Table of Contents
