Connecting Power; Bios Setup And System Assignments - Advantech UNO-2171 User Manual

Pentium-m/celeron-m universal network controller with pc/104+ expansion

Hide thumbs Also See for UNO-2171:

Table of Contents

Screw back the down storage panel with 6 screws

Note:

3.4 Connecting Power

Connect the UNO-2171 to a 10~53 VDC power source. The power

source can either be from a power adapter or an in-house power source.

UNO-2171 adopts Advantech's SOM-4486/4481 CPU module. Further

information about the SOM-4486/4481 CPU module, can be found in

SOM-4486/4481's user's manual. You can find this manual on the UNO-

2171's driver and utility CD-ROM.

Please note that you can try to "LOAD BIOS DEFAULTS" from the

BIOS Setup manual if the UNO-2171 does not work properly.

UNO-2171 User Manual

CN8 is Primary

CN11 is primary's master

CN10 is secondary's master

CN9 is secondary

Please do not use CN8 and CN11, CN10 and

CN9 (respectively) at same time.

If your OS is build in CF card and program,appli-

cation and data are save in HDD, please install

CF in CN10 and connect HDD in CN8.

Table of Contents