2.5
Installation Procedures
2.5.1
Connecting Power Cord
The panel PC can only be powered through an DC electrical outlet (12 - 30 V). Pay
attention to the positive and negative polarity of the DC input. Follow these proce-
dures to connect the power cord:
1.
Connect the female end of the power cord to the DC inlet of the panel PC.
2.
Connect the 3-pin male plug of the power cord to an electrical outlet.
2.5.2
Connecting Keyboard and Mouse
Connect the mouse and keyboard to the USB interface of the panel PC.
2.5.3
Switching on Power
Press the power switch located at the left of the I/O section.
15
PPC-1150 User Manual