Table of Contents
Advertisement
EN-50
11.5 Service information
If the Troubleshooting section does not resolve or describe your problem, you will need to
contact an authorized Ohaus Service Agent. For Service assistance in the United States,
please call Aftermarket, Ohaus Corporation toll-free at (800) 526-0659. An Ohaus Product
Service Specialist will be available to help you.
12. TECHNICAL DATA
12.1 Admissible ambient conditions
Indoor use only
Altitude:
Temperature range:
Atmospheric humidity:
Warm-up time:
Voltage fluctuations:
Over voltage category:
Pollution degree:
Power load:
Power supply voltage:
Power line fuse:
Up to 4000m
10 º C to 40 º C
Maximum relative humidity 80% for temperatures up to 31 ° C
decreasing linearly to 50% relative humidity at 40 ° C.
At least 30 minutes after connecting the instrument to the
power supply; when switched on from standby-mode, the
instrument is ready for operation immediately.
Mains supply voltage fluctuations up to ± 10% of the nominal
voltage
II
2
Max. 450 W during drying process
100 V – 90 VAC 5A 50/60 Hz or
200 V – 240 VAC 2.5A 50/60 Hz
(depending on the model)
6.3A 250VAC for 100-120VAC power supply or
2.5A 250VAC for 200-240VAC power supply according
to the heating element
MB95
Advertisement
Table of Contents
