Method Library; Use Of The Method Library; Method Load, Edit And Delete - OHAUS MB95 Instruction Manual

EN-32
7.

METHOD LIBRARY

This section contains information on the use of the Method Library which will enable you to
set the actual drying parameters such as Profile, Switch-Off, Display, Target Weight and the
use of the library.
The Operating Concept
You have already set the Moisture Analyzer setup in Section 6 and have tried the simple
moisture determination in Section 4. You are now ready to perform moisture determinations
in a precise manner. The test menu shown in Section 7 offers a number of setting
possibilities to match the measurement process to your specific requirements. For instance,
you can select the drying temperature, type of display and many other parameters.
Please keep in mind the importance of preparing your sample, the distribution of the sample
on the weighing pan, the type of sample and the temperature range. Remember, the greater
the number of uniform samples tested, the greater the accuracy of the results.
Please review this entire section before actually making any settings to become familiar with
the instrument.
7.1

Use of the method library

7.1.1 Method load, edit and delete

Press Method library in Home screen.
Press method name to check method
settings and load to current method.
Press to filter the method name.
Press Back to Home screen.
Press New to create a new method.
Press Export to export methods.
Press Import to import methods.
Enter the Method 1 to check the settings.
Press Back to previous screen.
Press Delete to delete this method.
Press Edit to edit method settings.
Press Load to load this method as current
method.
MB95