OHAUS MB95 Instruction Manual page 19

MB95 EN-17
Press adjustment button.
Press Back to return to previous screen.
Press Exit to return to Home screen.
Press Temperature adjustment button.
You are now prompted to remove the pan
support. Place a temperature calibration kit
and close the upper housing.
Press the Start to initiate the temperature
adjustment process. Follow the screen
prompts throughout the process.
The dryer unit is heated to a temperature of
100° C. You can observe the progress on the
display as the dryer temperature and count
down period are displayed. After 15 minutes,
read the thermometer through the inspection
window on the cover and enter this
temperature. Adjust the display reading to
agree with the thermometer, then press the
Enter button. You have 15 minutes to make
this adjustment, otherwise the adjustment is
terminated.
This is a two-point adjustment (100° C and
160° C). The dryer unit now heats to the
second temperature (160° C). Adjustment of
the temperature is defined by two points.
Proceed exactly as you did for the first
temperature. After you have set the display
to agree with the thermometer, then press
the Enter button.