Table of Contents
Advertisement
MB95
9.
HELP INFORMATION
Level Assist
10. PRINTING TEST DATA
Printing data to an external computer or printer requires the communication parameters be
set first.
Printing to an external printer or computer will occur each time the Print button is pressed. If
the Print Interval is set in the Test Menu, printing can occur in a continuous fashion at
specified intervals.
Samples of weight adjustment, temperature adjustment and test data are shown as follows:
Weight adjustment printout
WEIGHT ADJUST EXTERNAL
Weight Adjustment end 19.Dec 2017 11:20
Type
SNR
Nominal Weight
Actual Weight
Difference
Cell Temperature
Adjustment
Weight ID:
............................................................
Signature:
............................................................
------------END---------------
MB95
1234567
50.000 g
50.001 g
0.001 g
27.19 ° C
Done
Press Help button on the Home screen to
access the help information menu.
Select Level Assist button to access it.
Please adjust the level feet accordingly.
Press screen to exit.
Temperature adjustment printout
-TEMPERATURE ADJUSTMENT-
Temperature Adjustment end 19.Dec
2017 17:00
Type
SNR
Temp1 target
Temp1 actual
Temp2 target
Temp2 actual
Adjustment
Temp Kit ID:
......................................................
Signature:
.....................................................
------------END----------------
EN-43
MB95
1234567
100.0 ° C
100.0 ° C
160.0 ° C
166.0 ° C
Done
Advertisement
Table of Contents
