MB95
6.3.3 Sound
6.4
Device settings
6.4.1 Date and Time
This Moisture analyzer has a communication output which allows printing the date and time
on every record. When this instrument is put into operation for the first time, you should enter
the current date and time. These settings are retained even if you disconnect your
instrument from the power supply. A built-in battery will maintain all data. To set the date and
time, proceed as follows:
Press Setup button to access the Setup
menu.
Press Back to return to previous screen.
Press User settings button to access the
User settings menu.
Press Back to return to previous screen.
Press Exit to return to Home screen.
Press Sound button.
Adjust the volume of the beep to desired
level.
.
EN-21