Table of Contents
Advertisement
EN-12
Drying and measurement
You are now able to follow the progress of the drying
cycle on the display. This first display comes up
automatically when the test was started.
Observing the test progress
There are five displays available when the Moisture
Analyzer is running a test.
(Showing %MC, %DC, g, %RG or a curve. )
When pressing the data area while %MC is shown, the
display will cycle through each of the five displays.
The display indicates the Method Name,
Temperature/Time, actual temperature, elapsed time
duration of the test, moisture and curve. The test
automatically stops at the end of the measurement.
If you want to end the test sooner, press the
button.
Congratulations! You have just performed your first
measurement with your moisture analyzer.
Open the cover and carefully remove the sample pan
handle from the drying area.
The analyzer comes with a default method preinstalled.
The settings of the default method are shown on the
display. To edit the settings, press on the area where the
settings are displayed as shown to the left.
Press the setting items to edit them.
Please see section 7 for more details.
CAUTION: Danger of burns.
Sample, sample pan and
sample pan holder may still be
hot.
MB95
Advertisement
Table of Contents
