Table of Contents
Advertisement
installation
GF900
Install the fascia to the unit by hooking the left and right side mounting brackets into the mounting slots at the side of the fi rebox as shown
below. It is recommended that you use the fi rst mounting slot (the one closest to the door frame overlay) out of the 3 so that the faceplate
and door frame overlay are fl ush with one another. See diagram below.
NOTE: There are 3 mounting slots available, this is to accommodate any fi nishing that protrudes slightly beyond the faceplate.
tooltip
OPTIONAL FINISHING TRIM INSTALLATION
OPTIONAL FINISHING TRIM INSTALLATION
1. Install the optional finishing trim by lining up trim with the outside of
the fascia. Press trim inward firmly to seat onto the unit.
Note: magnets will keep the trim in place.
tooltip
919-220
2. Pull trim outward–away from the unit to remove.
42
919-615
tooltip
GLASS SURROUND INSTALLATION
Diagram 1 - Glass Surround Install
Diagram 3- Final Install
Diagram 2 - adjustments
Warning: Turn off the unit by way of the wall switch or remote.
Allow unit to cool at least 10 min. - prior to removing the
faceplate.
2
Finishing Trim Installed
1
+1/2" (13mm)
+1/4" (6mm)
Use fi rst notch in bracket
for standard installation
GF900/GF1500L
11/13/15
Regency GF900L-1 Gas Fireplace
11.05.15
Advertisement
Table of Contents
