How to Operate the TriMode Warmer
(Top Cavity)
Before you begin
Procedure
Co m bi n a ti o n B l an k et / Fl u i d W ar m er
The warmer must be connected to electric power and turned on.
WARNING:
Do not operate the warmer in the presence of a flammable
anesthetic mixture with air, oxygen, or nitrous oxide; in
oxygen-enriched environments; or in any other potentially
explosive environment.
WARNING:
Verify the fluid temperature prior to using the fluid. Refer to the
fluid manufacturer's label for recommended warming
procedures.
Do not use any fluids that are warmed above the suggested
temperature.
Do not overload the cavity.
NOTICE
Refer to topic Specification Information for the storage cavity
capacity.
To operate the warmer, do the following.
Step
Action
Select
1.
the operation mode.
Press
the irrigation button
▪
Press
the injection button
▪
The selected operation mode will illuminate
Press
the blanket button
▪
The blanket operation mode icon will not illuminate.
NOTE:
from a higher temperature to a lower temperature.
Ope r at or ' s Man u a l
MN -3 9 9 30
▪
▪
Personal injury hazard.
Personal injury hazard.
for irrigation mode.
for injection mode.
for blanket mode.
Open the door to cool the cavity before changing
Re v 2
4 / 2 0
▪
▪
O
PERATION
.
Continued on next page
31