Pedigo P-2150 Operator's Manual page 32

O
PERATION
During the warming
process
Result
32
Continued from previous page
2. Set the temperature using the arrow buttons

NOTE:
90°F – 150°F (32°C – 66°C).
The injection temperature set-point range is 90°F – 104°F
(32°C – 40°C).
The blanket temperature set-point range is 90°F – 160°F
(32°C – 71°C).
Open
3. the door and load the fluid or blankets into the warmer.
Close
the door.
Press
4. the temperature recall button
temperature.
The measured cavity temperature will display for five seconds. Then, the
set-point temperature will display.
The fluids or blankets are now warming.
Co m b i n at i on B l an k e t/ F l u id W a rm e r
The irrigation temperature set-point range is
to view the measured cavity
Op er a to r ' s Ma n u al
▪
.
M N- 39 9 3 0 Rev 2 4/ 2 0
▪ ▪ ▪