Pedigo P-2150 Operator's Manual page 42

Combination blanket/fluid warmer
Table of Contents

Advertisement

M
AINTENANCE
Yearly cleaning
procedure
Result
42
Continued from previous page
To clean the warmer yearly, do the following.
Step
Action
1.
Make sure
that the warmer is disconnected from electric power and cool.
Remove
2.
the shelves
3.
Remove
the side panels
4.
Clean
the shelves and interior with a damp cloth or approved cleaning agent.
Dry
5.
the interior of the warmer with a clean, lint-free cloth.
Leave
the door open until the interior of the warmer completely dries.
6.
Clean
each side of the window pane with glass cleaner or distilled vinegar.
Re-install
7.
the side panels and shelves.
The warmer is now clean.
Co m b i n at i on B l an k e t/ F l u id W a rm e r
a
from the interior of the warmer.
b
from the interior of the blanket warmer cavity.
b
WARNING:
Personal injury hazard.
The blankets or fluids may overheat if the side panels
and shelves are not in place. Make sure to re-install
the side panels and shelves before operating the
warmer.
Op er a to r ' s Ma n u al
a
a
EC-TS-004655
EC-TS-004658
M N- 39 9 3 0
Rev 2
4/ 2 0

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-2147

Table of Contents