Operation; Preparing The Warmer For First Use - Pedigo P-2150 Operator's Manual

Preparing the Warmer for First Use

Before you begin
Approved cleaning
agents
Procedure
Result
Co m bi n a ti o n B l an k et / Fl u i d W ar m er
CAUTION:
Allow the warmer to cool before cleaning.
Do not use:
NOTICE
▪
abrasive cleaning compounds.
▪
chloride based cleaners.
▪
commercial or household cleaners containing ammonia.
▪
70% or greater isopropyl alcohol
▪
PDI Sani-Cloth® HB
To prepare the warmer for first use, do the following.
Step Action
Make sure
1. that the warmer is turned off and cool.
2. Wipe the outside of the warmer:
with a stainless steel cleaner, if stainless steel panels.
▪
with an approved cleaning agent, if painted panels.
▪
3. Clean the interior of the warmer with a damp cloth or approved cleaning
agent.
4. Dry the interior and exterior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
Clean
5. each side of the window pane with glass cleaner or distilled vinegar.
The warmer is now ready for use.
Ope r at or ' s Man u a l MN -3 9 9 30
▪ ▪
Burn hazard.
Re v 2 4 / 2 0
▪ ▪
O
PERATION
27