How To Turn On And Turn Off The Warmer - Pedigo P-2150 Operator's Manual

O
PERATION

How to Turn On and Turn Off the Warmer

Before you begin
Turning on the
warmer
28
The warmer must be connected to electric power.
To turn on the warmer, do the following.
Step Action
Set
1. the power switch
P-2147
2. Press the standby button
The blanket warmer and TriMode warmer screens must be turned ON
separately.

NOTE:
start-up of the warmer. Contact the manufacturer if the
odor persists after a day or more of continuous use.
The warmer is now on.
Co m b i n at i on B l an k e t/ F l u id W a rm e r
a
to the ON (l) position.
P-2150
a
. The screen turns on.
A temporary odor may be noticeable upon initial
Op er a to r ' s Ma n u al
▪
a
EC-TS-009577
Continued on next page
M N- 39 9 3 0 Rev 2
▪ ▪ ▪
4/ 2 0