Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
●
When loading or unloading from a trailer, always travel at low
speed. Never operate the travel speed selector switch during
the loading or unloading operation.
REMARK
Each time that the travel speed selector switch is operated,
the mode is displayed in the centre of the monitor display, and the
screen returns to the normal screen after 2 seconds.
4. MENU SELECT SWITCH
This switch (4) is used to select the hydraulic flow setting in each
of the working modes A, E, and B.
When the working mode is A or E
●
1. Press select switch (4) and the normal screen on the monitor
display changes to the flow setting screen shown in the dia-
gram on the right.
Press up switch (7) or down switch (8) to adjust to the desired
flow. Each segments value is shown below.
2. After completing the flow setting, press input confirmation
switch (9).
The monitor display will return to the normal screen.
96
Monitor display portion
2 seconds
7
8
OPERATION
4
9
Advertisement
Table of Contents
