Komatsu PW160-7K Series Operation And Maintenance Manual page 114

SWITCHES
WINDSCREEN WASH SWITCH
When the sleeve switch on the steering column stalk (24b) is
pushed towards the steering column the windscreen wash will
operate.
DIRECTION INDICATOR SWITCH
This switch (24) is used to indicate the driver's intention to change
direction.
(1) Turn right: push lever fully forward
(2) Turn left: pull lever fully back
(direction indicator (a) to the rear of the steering wheel hub
will flash and buzzer will sound)
To cancel, return lever to neutral position.
ROADLIGHTS DIP/MAIN BEAM/FLASH SWITCH
This switch (24c) has two functions.
To alternate between headlight dipped and main beams. For
●
main beam push steering column stalk fully downwards.
(Note road lights switch (28) must be at position (3) for this
function) Reverse operation to return to dipped beam
Warning light (13) will illuminate on the monitor panel when
main beam headlights are illuminated.
To flash headlights pull steering column stalk fully upwards
●
and release.
MAIN WINDSCREEN WIPER SWITCH
This rotary switch (24d) on column stalk controls main windscreen
wiper.
Rotate switch 30° away.
●
From operator for intermittent wipe
Rotate switch a further 30° away
●
From operator for continuous wipe.
114
24b
24
1
2
a
24c
FLASH
DIP
MAIN
24d
OFF
INTERMITTENT
CONTINUOUS
OPERATION