Komatsu PW160-7K Series Operation And Maintenance Manual page 41

Table of Contents

Advertisement

SAFETY
WARNING: Failure to follow these safety precautions may lead to a serious accident.
CHECKING HOOK
When lifting a load, carry out the following checks to confirm
that there is no abnormality before starting operations.
Check that there are no cracks or deformation in the lift-
ing equipment.
Check that there is no abnormality in the safety latch of
the hook.
HOOKING WIRE ROPE SECURELY TO HOOK
When performing lifting operation, securely hook the wire
rope onto the special lifting hook or lifting eye.
PRECAUTIONS FOR MACHINE INSTALLATION
After carrying out a preliminary inspection of ground condi-
tions, select a flat, solid location. Confirm that the machine
can be safely operated without toppling or rolling.
PROHIBITED OPERATIONS OTHER THAN MAIN APPLICA-
TIONS
When performing lifting operation, never raise or lower a per-
son.
NO PERSONS SHALL BE PERMITTED TO ENTER THE
WORKING AREA
Due to the possible danger of the load falling or of collision
with the load, no persons shall be allowed in the working
area.
OPERATION SUPERVISOR
Before performing lifting operation, designate an operation
supervisor.
Always execute operation according to his instructions.
Execute operating methods and procedures under his
direction.
Select a person responsible for signalling. Operate only
on signals given by such person.
HANDLING OF WIRE ROPES ETC.
Wear leather gloves when handling wire ropes.
PROTECTING EYES
Some oils and fluids can damage eyes. Refer to manufac-
tured data sheet for handling and storage instructions.
PRECAUTION DURING OPERATION
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pw160-7k-k40001

Table of Contents