Table of Contents
Advertisement
OPERATION
6. Check that lock lever (B) is secured at the LOCK position.
The lock is engaged if the arrow on lock case (F) lines up with
●
the arrow on lock lever (B). Check it visually.
If the arrow on lock case (F) does not line up with the arrow
●
on lock lever (B), the lock is not properly engaged. Repeat the
operation in Step 5 to engage the lock.
When closing
When closing the window, lower it slowly and be careful not
to get your hand caught.
1. Place the work equipment on flat ground and stop the engine.
2. Raise the safety lock lever.
3. Grip left and right knobs (A), and pull down lock lever (B) to
release the lock.
WARNING
CONTROL LEVERS, PEDALS
LOCK
UNLOCK
123
Advertisement
Table of Contents
