Table of Contents
Advertisement
OPERATION
OPERATION OF DOZER + OUTRIGGERS
REMARK
Ensure safety lock lever is lowered (UNLOCKED).
1. Press switch (3) on right control lever to change from boom
operation to dozer/outrigger operation (attachment).The mon-
itor will now display symbol (12) indicating the dozer/outrigger
option has been selected
2. Using monitor panel switches (16~20) select the desired
combination of dozer/outriggers required. A light will illumi-
nate next to the switch to confirm selection
16
Rear Left Outrigger / Blade
17
Front Left Outrigger / Blade
18
All Outriggers/Outrigger & Blade
19
Front Right Outrigger
20
Rear Right Outrigger
3. Right control lever (4) will now operate the dozer/outriggers
1
Lever forward
2
Lever back
4. To return right control lever to boom operation activate switch
(3). Symbol (12) will now disappear from the monitor panel
display
When moving the machine, confirm that the chassis attach-
ment is raised.
PRECAUTIONS FOR USING THE DOZER
1. When using the dozer blade as stabiliser.
Use the dozer blade in the same way as an outrigger. How-
ever, use it only on level ground so that uneven loads will not
be applied to the blade.
2. When using the dozer blade with the upper structure facing
the rear of the undercarriage, the steering wheel acts in the
opposite direction to normal travel.
3. Ensure that suspension lock system is fully free when
required for dozing operations. see "AUTOMATIC SUSPEN-
SION LOCK SWITCH (101)"
REMARK
Dozer blade is to be used only for stabilizing and light dozing.
Attachment down
Attachment up
WARNING
OPERATIONS AND CHECKS BEFORE STARTING ENGINE
17
16
3
18
19
20
12
4
Right control lever
181
Advertisement
Table of Contents
