Table of Contents
Advertisement
OPERATION
Allow the engine to cool before checking the oil level to
avoid burns by touching hot engine parts.
CHECK FUEL LEVEL, ADD FUEL
When adding fuel, never let the fuel overflow. This may cause
a fire. If fuel is spilled, thoroughly clean up any spillage.
1. Check fuel level on monitor panel (D).
2. If fuel level is on the E marker you need to refill the tank.
3. Open fuel filler cap (F) on fuel tank.
4. When the fuel filler cap (F) is opened, float gauge within filler
neck will rise according to fuel level. Check that the fuel tank
is full by looking into tank and checking float gauge.
5. If the tank is not full, add fuel through the fuel filler until the
float gauge (G) rises to the maximum position. Fuel tank
capacity: 290 litres. Position of tip of float gauge (G) when
tank is full: Approx. 50 mm from top of surface of fuel tank.
6. After adding fuel, push float gauge (G) straight down with fuel
filler cap (F). Be careful not to get float gauge (G) caught in
the tab of fuel filler cap (F), and tighten fuel filler cap (F)
securely.
For details of the fuel to use, see "USE FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPER-
ATURE (234)"
152
WARNING
WARNING
OPERATION
D
F
Approx
50mm
Advertisement
Table of Contents
