Table of Contents
Advertisement
OPTIONS, ATTACHMENTS
●
The deterioration of the hydraulic oil when using the breaker
is much faster than for normal operations, so reduce the
maintenance interval for the hydraulic oil and element.
For details, see "MAINTENANCE SCHEDULE CHART
(242)".
WHEN USING CRUSHER OR OTHER GEN-
ERAL ATTACHMENT
When the A mode or E mode control switch is ON and the lock pin
position makes both the front and the rear of the pedal free, if the
front or rear of the pedal is depressed, the attachment is actuated.
1. Set the working mode to A mode or E mode.
2. When select switch (1) on the monitor is pressed, the screen
changes to screen (C), so press up switch (3) or down switch
(4) to move the bar graph showing the oil flow up or down,
then press input confirmation switch (2).
The default setting is the full flow
●
●
Even if the starting switch is turned OFF, the set oil flow when
the engine is next started will be the value set by the above
procedure.
Precautions when using
Check that the stop valve is at the FREE position.
●
Check that the selector valve is in the position for general
●
attachments such as crusher, check that working mode is A
mode or E mode.
For other precautions when handling the attachment, follow
●
the instruction manual from the attachment manufacturer and
use the attachment correctly.
(approx.
320 litres/min.
MACHINES READY FOR ATTACHMENTS
0.
3
4
Both the front
and the rear
of the pedal free
1
2
323
Advertisement
Table of Contents
