Table of Contents
Advertisement
OPTIONS, ATTACHMENTS
When applying continuous impact to the same impact surface, if
the chisel does not penetrate or break the surface within 1
minute, change the point of impact and carry out breaking opera-
tions closer to the edge.
The direction of penetration of the chisel and the direction of the
breaker body will gradually move out of line with each other, so
always adjust the bucket cylinder to keep them aligned.
Always keep the chisel pressed against the impact surface prop-
erly to prevent using the impact force when there is no resistance.
MISTAKEN METHODS OF USE
To ensure that the machine has a long life, and to ensure that
operations are carried out in safety, do not operate the machine in
any of the following ways.
Do not operate the cylinder to the end of its stroke.
●
Always leave approx. 5 cm to spare.
Using the mount to gather in pieces of rock
Operations using the swing force
INTRODUCTION OF ATTACHMENTS AND EXTENDING MACHINE SERVICE LIFE
AL069780A
AL069800A
AL069810A
327
Advertisement
Table of Contents
