Komatsu PW160-7K Series Operation And Maintenance Manual page 139

OPERATION
OPERATION WITH COLD AIR TO FACE AND WARM AIR TO
FEET
To operate with cold air blowing to the face and warm air blowing
to the feet, set as follows.
1. Press fan switch (2) and adjust the air flow. When doing this,
check that temperature setting (a) and air flow (b) are dis-
played on the display monitor.
2. Press vent selector switch (4) and set the vent display on the
display monitor to the display shown in the diagram on the
right.
3. Turn air conditioner switch (8) ON. When this is done, the
lamp above the air conditioner switch lights up.
CONTROL LEVERS, PEDALS
139