Table of Contents
Advertisement
Fuel Filler Cap Vent Knob
(optional equipment)
OPEN
CLOSE
FUEL FILLER CAP
The fuel filler cap is provided with a
vent knob to seal the portable fuel
tank for carrying it to and from the
boat. Open the vent by turning the
vent knob counterclockwise all the
way before starting the engine.
Fuel Priming Bulb
VENT KNOB
A priming bulb is built into the fuel
hose that connects the fuel tank to the
outboard motor.
Before starting the engine, hold the
priming bulb up in the direction of the
arrow; then squeeze the priming bulb
until it feels firm. This will ensure
that fuel is supplied to the engine
(p. 50).
UP
OUTLET END
(outboard
motor side)
PRIMING BULB
INLET END
(tank side)
CONTROLS AND FEATURES
NMEA Interface Coupler
®
The NMEA2000
can provide information regarding
engine speed, fuel consumption, and
various warnings to an existing
NMEA2000 network via an optional
interface cable. Contact your dealer
for more information.
NMEA INTERFACE COUPLER
interface coupler
39
Advertisement
Table of Contents
