CONTROLS AND FEATURES
Common Controls
Power Trim/Tilt Switch
(tiller handle/control lever side)
Tiller Handle Type
POWER TRIM/
TILT SWITCH
Press DN to trim
or tilt the outboard
motor down.
Press UP to trim
or tilt the outboard
motor up.
28
LRT Type
(side-mount control)
CONTROL LEVER
Press UP to trim
or tilt the outboard
motor up.
Press DN to trim
or tilt the outboard
motor down.
POWER TRIM/TILT SWITCH
The power trim/tilt switch is located
on the tiller handle or on the control
lever. It is a rocker switch with UP
and DN (down) positions for
changing the angle of the outboard
motor.
You can use the power trim/tilt switch
anytime whether the boat is
underway, stopped, or the ignition
switch is in the OFF position. It is
necessary for the ignition switch to be
in the ON position for the trim meter
to indicate the outboard motor angle.
Trim the outboard motor to obtain the
best performance and stability (p. 66).
Tilt the outboard motor for shallow
water operation, beaching, launching,
or mooring.