Form Overlay - Kyocera TASKalfa 4012i Operation Manual

Using Various Functions > Functions

Form Overlay

Layout/Edit
Copy
Prints the original document overlaid with a form or image.
Once you scan and register the form, the form is overlaid onto the original. You can also use a form that is already
registered in the Job Box.
Place the original for the form on top of the other originals. When using the optional document processor, the first page
of the originals should be placed on the top.
Item
Off
Select Stored Density
Form
Finishing
Image
Select Form
Scan New Density
*2
Form
Finishing
Image
*1 Form must be previously registered in Job Box.
Form for Form Overlay (page 5-62)
*2 Not displayed when printing from the custom box.
Functions
Custom
Box
Form
10% to 100%
Transparent
Form on Original Image
Original Image on Form
*1
―
10% to 100%
Transparent
Form on Original Image
Original Image on Form
Density:
30%
Original Copy
Density:
100%
Value
6-48
Description
Specify the density of the form to be
overlaid.
Select [+] or [-] in "Density".
The form is overlaid on the document.
The form is placed on top of the document.
The form is placed under the document.
Select the form to be overlaid from Job
Box.
Select [Select Form] to display the job
boxes that store documents which can be
used as a form. Select the desired form
from the list and select [OK].
Specify the density of the form to be
overlaid.
Select [+] or [-] in "Density".
The form is overlaid on the document.
The form is placed on top of the document.
The form is placed under the document.