Certifications And Standards - Pro-face GP-4400 Series Hardware Manual

7.2

Certifications and Standards

Introduction
Pro-face submitted this product for independent testing and qualification by third-
party listing agencies. These agencies have certified this product as meeting the
following standards.
Agency Certifications
The GP unit is manufactured in accordance with:
Note:
Hazardous Substances
The GP is a device for use in factory systems. When using the GP in a system, the
system should comply with the following standards in regards to the installation
environment and handling:
CE Markings
This product conforms to the necessary requirements of the following Directives for
applying the CE label:
This conformity is based on compliance with EN61000-6-4, EN61000-6-2
For information on Standards and Regulations, such as certified models and
certificates, see the following.
http://www.pro-face.com/worldwide.html
UL 508 and CSA C22.2 n°142 for Industrial Control Equipment
For use in Pollution Degree 2 environments.
For use on a flat surface of a Type 1 Enclosure.
24 Vdc input panel must be used with a Class 2 power supply.
WEEE, Directive 2012/19/EU
RoHS, Directive 2011/65/EU
RoHS China, Standard SJ/T 11363-2006
2004/108/EC EMC Directive
GP4000 Series Hardware Manual
173