Certifications And Standards - Pro-face PS-4700 Series User Manual

Important Information

Certifications and Standards

Agency Certifications
Compliance Standards
Qualification Standards
Hazardous Substances
18
Pro-face submitted this product for independent testing and qualification by third-
party agencies. These agencies have certified this product as meeting the following
standards.
Underwriters Laboratories Inc., UL 508 and CSA C22.2 N142, Industrial Control

Equipment
Underwriters Laboratories Inc., ANSI/ISA 12.12.01 and CSA C22.2 N213,

Electrical Equipment for Use in Class I, Division 2 Hazardous (Classified)
Locations
GOST certification

ATEX Category 3 Zone 2/22 certification

Germanischer Lloyd (GL) Type approval

For information on certifications and standards, such as certified models and
certificates, see the following or product markings.
http://www.pro-face.com/worldwide.html
Pro-face tested this product for compliance with the following compulsory standards.
United States:
Federal Communications Commission, FCC Part 15

Food and Drug Administration, FDA 21 CFR 177 (Installation Gasket: §177.2600)

(for the front panel design of Stainless Steel Bezel Model)
Europe:
CE

Directive 2006/95/EC (Low Voltage)
Directive 2004/108/EC (EMC)
Programmable Controllers: EN 61131-2 (Ed 3)
EMI: EN55011 (Group 1, Class A), EN 61000-6-4
EMS: EN 61000-6-2
Directive 94/9/EC (ATEX)
EN 1672-2 (for the front panel design of Stainless Steel Bezel Model)

Australia:
Standard AS/NZS CISPR11 (C-Tick)

Pro-face voluntarily tested this product to additional standards. The additional tests
performed, and the standards under which the tests were conducted, are specifically
identified in Environmental Characteristics (see page 38).
This product is compliant with:
WEEE, Directive 2002/96/EC

RoHS, Directive 2002/95/EC

RoHS China, Standard SJ/T 11363-2006

REACH regulation EC 1907/2006
