Package Contents - Pro-face GP-4400 Series Hardware Manual

7.1
Revision
172

Package Contents

Verify all items listed here are present in your package:
GP unit: 1
1
DC power supply connector: 1
2
USB cable clamp Type A: 1 set (1 clip and 1 tie)
3
Installation gasket: 1 set (8 per set)
4
Installation fasteners: 2 per set (attached to the top and bottom surfaces of the GP unit)
5
Installation screws: 4 per set (attached to the top and bottom surfaces of the GP unit)
6
GP4000 Series Rear Mount Model Installation Guide: 1
7
Warning/Caution Information: 1
8
This unit has been carefully packed with special attention to quality. However,
should you find anything damaged or missing, please contact your local distributor.
*1
You can use the DC power supply connector for GP-4300/4400 series to supply
power to GP-4500/4600 series. However the reverse is not possible. You cannot
use the DC power supply connector for GP-4500/4600 series on GP-4300/4400
series.
You can identify the product revision from the product label on the GP unit. The
following diagram is a representation of Revision A. The product label indicates
Revision A with an asterisk (*) in the "A" position.
REV * B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5
*1