Environmental Specifications - Pro-face GP-4400 Series Hardware Manual

Specifications

Environmental Specifications

Air quality requirements
66
Surrounding Air
Temperature
Storage Temperature
Surrounding Air and
Storage Humidity
Dust
Pollution Degree
Corrosive Gases
Atmospheric Pressure
(Operating Altitude)
Vibration Resistance
Concussion Resistance
Noise Immunity
Electrostatic Discharge
Immunity
Do not operate or store the panel where chemicals evaporate, or where chemicals
are present in the air:
Corrosive chemicals: Acids, alkalines, liquids containing salt.
Flammable chemicals: Organic solvents.
INOPERATIVE EQUIPMENT
Do not allow water, liquids, metal, and wiring fragments to enter the panel case.
Failure to follow these instructions can result in injury or equipment damage.
GP-4301T / GP-4303T
0...55 °C (32 °F...131 °F)
-20...60 °C (-4...140 °F)
10...90% RH (Non condensing, wet bulb temperature 39
°C [102.2 °F] or less)
3 -7 3
0.1 mg/m (10 oz/ft ) or less (non-conductive levels)
For use in Pollution Degree 2 environment
Free of corrosive gases
800...1,114 hPa (2,000 m [6,561 ft] or lower)
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s
X, Y, Z directions for 10 cycles (approx. 100 min)
IEC/EN 61131-2 compliant
2
147 m/s , X, Y, Z directions for 3 times
Noise Voltage: 1,000 Vp-p
Pulse Width: 1 µs
Rise Time: 1 ns
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level
3)
CAUTION
GP-4301TW
0...50 °C (32...122 °F)
2