Installation Prerequisites For Standards - Pro-face PS-3650A Series Hardware Manual

Installation prerequisites for standards

• UL listed products
Industrial Control Equipment
• c-UL listed products
Process Control Equipment
• Product List
Product Model No.
PS3650A-T42
PS3650A-T42S
PS3651A-T42
PS3651A-T42S
PS3650A-T42-24V
PS3650A-T42S-24V
PS3651A-T42-24V
PS3651A-T42S-24V
For the detailed certification's information, refer to the Pro-face Home page.
<Cautions>
Be aware of the following items when building the PS-A into an end-use product:
• The PS-A unit's rear face is not approved as an enclosure. When building the PS-A unit into an end-use product, be
sure to use an enclosure that satisfies standards as the end-use product's overall enclosure.
• The PS-A unit must be used indoors only.
• Install and operate the PS-A with its front panel facing outwards.
• If the PS-A is mounted so as to cool itself naturally, be sure to install it in a vertical panel. Also, it's recommended that
the PS-A should be mounted at least 50 mm [1.97 in.] away from any other adjacent structures or machine parts. The
temperature must be checked on the final product in which the PS-A is installed.
• For use on a flat surface of a Type 4X (Indoor Use Only) and/or Type 12 Enclosure.
• Type 4X (Indoor Use Only) and/or 12 Enclosure, when the hatch for Front USB Port is secured by screw.
Type 1 Enclosure, when the hatch for Front USB Port is open.
• The temperature rating of field installed conductors: 75
The safety certificate can be downloaded from Pro-face Home Page.
Home Page URL
http://www.pro-face.com/
refer to UL508
refer to CSA-C22.2
No.142
Registration Model
No.
3480801-02
3480801-01
3480801-12
3480801-11
o
C only.
see [a] in the
"Product List"
see [b] in the
"Product List"
UL c-UL
[a] [b]
UL/c-UL File No.: E220851
9