Configuring Image Parameters; Configuring Display Settings - HIKVISION DS-2CD63C5G0-IVS User Manual

5.5 Configuring Image Parameters

5.5.1 Configuring Display Settings

Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation,
sharpness, etc.
Steps:
1. Enter the Display Settings interface:
Configuration > Image> Display Settings
2. Set the image parameters of the camera.
Note: In order to guarantee the image quality in the different illumination, it
provides two sets of parameters for user to configure.
Day/Night Auto-switch
Figure 5-38 Display Settings of Day/night Auto-switch
 Image Adjustment
Brightness describes bright of the image, which ranges from 1 to 100, and
the default value is 50.
Contrast describes the contrast of the image, which ranges from 1 to 100,
and the default value is 50.
User Manual of Network Fisheye Camera
75