Display Info. On Stream; Configuring Event Settings; Configuring Motion Detection - HIKVISION DS-2CD63C5G0-IVS User Manual

5. Drag the red rectangle to adjust the position.
6. Click Save to save settings.
Note: The picture must be in RGB24 bmp format and the maximum picture size is
128*128.

5.5.5 Display Info. on Stream

Check the checkbox of Enable Dual-VCA, and the information of the objects (e.g.
human, vehicle, etc.) will be marked in the video stream. Then, you can set rules on
the connected rear-end device to detect the events including line crossing, intrusion,
etc.

5.6 Configuring Event Settings

This section explains how to configure the network camera to respond to alarm events,
including motion detection, video tampering, alarm input, alarm output, exception,
exception detection, intrusion detection, and line crossing detection, etc. These events
can trigger the linkage methods, such as Notify Surveillance Center, Send Email,
Trigger Alarm Output, etc.
Note: Check the checkbox of Notify Surveillance Center if you want to push the
alarm information to the surveillance client such as the mobile phone, computer, etc.,
as soon as the alarm is triggered.

5.6.1 Configuring Motion Detection

Purpose:
User Manual of Network Fisheye Camera
Figure 5-43 Display Info. on Stream Setting
82