HIKVISION DS-2CD63C5G0-IVS User Manual page 89

User Manual of Network Fisheye Camera
If Expert is selected as the configuration mode, different sets of parameters are
adopted for motion detection at day and night.
●
Day/Night Switch OFF
Steps:
(1) Draw the detection area as in the normal configuration mode. The
supported area number varies according to different camera models.
(2) Select OFF for Switch Day and Night Settings.
(3) Select the area by clicking the area No..
(4) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area.
Sensitivity: The greater the value is, the easier the alarm will be triggered.
Percentage: When the size of the moving object exceeds the set
percentage of the predefined area, the alarm will be triggered. The smaller
the percentage is, the easier the alarm will be triggered.
(5) Set the arming schedule and linkage method as in the normal
configuration mode.
(6) Click Save to save the settings.
●
Day/Night Auto-Switch
Steps:
(1) Draw the detection area as in the normal configuration mode. The
supported area varies according to the different camera models.
(2) Select Auto-Switch for Switch Day and Night Settings.
(3) Select the area by clicking the area No..
(4) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area in the daytime.
(5) Slide the cursor to adjust the sensitivity and proportion of object in the
area for the selected area at night.
(6) Set the arming schedule and linkage method as in the normal
configuration mode..
88