Handling Exception; Configuring Line Crossing Detection - HIKVISION DS-2CD63C5G0-IVS User Manual

Note: Alarm output settings vary according to the camera model.

5.6.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the cameras.
Steps:
1. Enter the Exception Settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to select the linkage method taken for exception. For details,
refer to Task 3: Set Linkage Method for Motion Detection in Section 5.6.1.
3. Click Save to save the settings.

5.6.6 Configuring Line Crossing Detection

Purpose:
Line crossing detection function detects people, vehicle or other objects which cross a
pre-defined virtual line, and some certain actions can be taken when the alarm is
triggered.
Note: Line Crossing Detection is not supported when the decoding mode is hardware
decoding and the display mode is 4PTZ.
Steps:
1. Enter the Line Crossing Detection settings interface:
Configuration > Events > Smart Event > Line Crossing Detection
2. Check the checkbox of Enable to enable the function.
User Manual of Network Fisheye Camera
Figure 5-51 Exception Settings
93