Security Service; User Management - HIKVISION DS-2CD63C5G0-IVS User Manual

(3) Click the OK to finish modifying.
 Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete.
5. Click Save to save the settings.

5.2.10 Security Service

To enable the remote login, and improve the data communication security, the camera
provides the security service for better user experience.
Steps:
1. Go to Configuration > System > Security > Security Service to enter the
security service configuration interface.
2. Check the checkbox of Enable SSH to enable the data communication security,
and uncheck the checkbox to disable the SSH.
3. Check the checkbox of Enable Illegal Login Lock, and then the IP address will
be locked if the admin user performs 7 failed user name/password attempts (5
times for the operator/user).
Note: If the IP address is locked, you can try to login the device after 30 minutes.

5.2.11 User Management

Enter the User Management interface:
Configuration > System > User Management
User Manual of Network Fisheye Camera
Figure 5-16 Security Service
49