The preset name turns from black to grey.
4.4.3 Setting/Calling/Deleting a Patrol
Purpose:
A patrol is a scanning track specified by a group of defined presets, with the duration
time at each preset separately programmable.
Before you start:
At least 2 presets are required to set a patrol.
Setting a Patrol
Steps:
1. Click the icon
2. Select a path No. from the drop-down list, and click the icon
patrol path.
3. Click
to add a preset into the path, and click
4. Set the preset number, speed and lingering time at each preset. You can adjust the
order of presets by using
5. Click OK to save patrol path.
User Manual of Network Fisheye Camera
to enter the patrol configuration interface.
Figure 4-8 Patrol Configuration (1)
and
.
Figure 4-9 Patrol Configuration (2)
35
to configure
to delete a preset.