Picture Overlay - HIKVISION DS-2CD63C5G0-IVS User Manual

2. Select a camera channel to configure.
3. Check the checkbox of Enable Privacy Mask to enable this function.
4. Click the Draw Area button to start drawing.
5. Click-and-drag the mouse in the live video window to draw the mask area.
6. Click Stop Drawing to finish drawing.
7. You can click Clear All to clear all the configured privacy masks.
8. Click Save to save the settings.
Note: Up to 4 privacy masks are configurable.

5.5.4 Picture Overlay

Purpose:
Picture overlay enables you to overlay a picture on the image. This function enables a
certain enterprise or users to overlay their logo on the image.
Steps:
1. Enter the Picture Overlay Settings interface, Configuration > Image > Picture
Overlay.
2. Click Browse to select a picture.
3. Click Upload to upload it.
4. Check Enable Picture Overlay checkbox to enable the function.
User Manual of Network Fisheye Camera
Figure 5-42 Picture Overlay
81