HIKVISION DS-2CD63C5G0-IVS User Manual page 93

Network fisheye camera
Hide thumbs Also See for DS-2CD63C5G0-IVS:
Table of Contents

Advertisement

1. Enter the Alarm Output Settings interface:
Configuration > Events > Basic Event > Alarm Output
2. Select one alarm output channel in the Alarm Output drop-down list.
3. (Optional) Input the alarm output name in the text field.
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output remains
in effect after alarm occurs.
5. Set the arming schedule. Refer to Task 2: Set Arming Schedule for Motion
Detection in Section 5.6.1.
6. (Optional) You can copy the settings to other alarm outputs.
7. Click Manual Alarm to trigger an alarm manually. Click Clear Alarm to cancel
the alarm.
8. Click Save to save the settings.
User Manual of Network Fisheye Camera
Figure 5-50 Alarm Output Settings
92

Advertisement

Table of Contents
loading

Table of Contents