Setting The Network Camera Over The Wan; Static Ip Connection - HIKVISION DS-2CD63C5G0-IVS User Manual

User Manual of Network Fisheye Camera
Figure 2-9 Modifying the Network Parameters
8. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
9. Input the password to activate your IP address modification.

2.2 Setting the Network Camera over the WAN

Purpose:
This section explains how to connect the network camera to the WAN with a static IP
or a dynamic IP.

2.2.1 Static IP Connection

Before you start:
Please apply a static IP from an ISP (Internet Service Provider). With the static IP
address, you can connect the network camera via a router or connect it to the WAN
directly.

Connecting the network camera via a router
Steps:
1. Connect the network camera to the router.
18