4 Verify Internet Connection Settings - Tenda F456 User Manual

Wireless n450 home router
Table of Contents

Advertisement

Note   
1. DHCP is the default Internet connection type; 
2. If you are not sure about your PPPoE username and password, contact your Internet service provider (ISP) 
for help. For other Internet connection types, please go to section 2.2: WAN.   
4 Verify Internet Connection Settings 
System automatically skips to the status page when you finish all needed settings on the home page. Here 
you can see the system status and WAN connection status of the device. 
1.  If  you  find  Connected  and  a  WAN  IP  address  displayed  there  (as  shown  below),  you  have  got  a  wired 
internet access now. 
 
2. If connection status displays Cable improperly connected and there is no WAN IP address displayed (as 
seen  below),  connection  between  the  Internet‐enabled  modem  and  your  device  may  have  failed.  Please 
double check or re‐connect all involved devices and cables properly and then refresh the page. If nothing is 
wrong, Connecting or Connected will be displayed. 
12
Wireless N450 Home Router
 
 

Advertisement

Table of Contents
loading

Table of Contents