Omron F160 Operation Manual page 24

Menu Operations
Note 2: Display Images
SeeAlso
Screen Configuration for Conversational Menus
The settings sequence for Conversational Menus is displayed.
>> indicates the current setting step.
Questions or instructions from the F160 are displayed.
Possible selections are given in boxes.
CHECK
Black background
Initial status
0.Scn 0 =SET= Ref image
One image must be
saved as a reference
for inspection.
Set the method to
use to store images.
Console STEP Back
S+←→:Display S+ENT:Shutter
Use the S + Left and S + Right Keys to switch between message box display types on the current screen.
Display
TOOL Has data backup and Memory Card menus. Saves settings and
images to a computer or Memory Card as backup.
SAVE Saves data to flash memory. If new settings have been made, be
sure to save the data before quitting.
Refer to page 104.
Display
Through The latest image taken by the Camera is displayed directly.
Freeze A still of the image taken by the Camera is displayed.
... Memory@@ The previously saved measurement images are displayed. Up to
36 screens can be saved by the F160 and they are saved in
order from 0 to 35.
0.Scn 0 =SET= Ref image
One image must be
Start
saved as a reference
>> Ref image
Region
Position
Set the method to
End
use to store images.
Console STEP
S+←→:Display S+ENT:Shutter
The message box is displayed in black to make it easier to read the mes-
sages. When you want to check the whole screen image, use the following
procedure to change the message display conditions.
All blank
+
SHIFT
+
SHIFT
Meaning
Meaning
Additional information is displayed
for this step or question.
for inspection.
Back
Select Back or press the ESC Key to return
to the previous screen.
+
SHIFT
SHIFT
Section 2-2
Clear background
0.Scn 0 =SET= Ref image
One image must be
Start
>> Ref image
saved as a reference
Region for inspection.
Position
Set the method to
End
use to store images.
+
Console STEP Back
S+←→:Display S+ENT:Shutter
15