The following table describes the labels in this screen.
LABEL
Active
Select this check box to permit 802.1x authentication on the switch.
You must first allow 802.1x authentication on the switch before configuring it on
Port
This field displays a port number.
Active
Select this checkbox to permit 802.1x authentication on this port. You must first allow 802.1x
authentication on the switch before configuring it on each port.
Reauthentication Specify if a subscriber has to periodically re-enter his or her username and password to stay
connected to the port.
Reauthentication
Specify how often a client has to re-enter his or her username and password to stay connected
Timer
to the port.
Apply
Click Apply to save your changes back to the switch.
Cancel
Click Cancel to begin configuring this screen afresh.
Port Authentication
Figure 15-4 Port Authentication: 802.1x
Table 15-2 Port Authentication: 802.1x
Dimension GS-3012 Gigabit Ethernet Switch
DESCRIPTION
each port.
15-3