This chapter shows you how you can cap the maximum bandwidth allowed from specific source(s) to
11.1 Introduction to Bandwidth Control
Bandwidth control means defining a maximum allowable bandwidth for incoming and/or out-going traffic flows
on a port. Click Advanced Application and then Bandwidth Control in the navigation panel to bring up the
screen as shown next.
The following table describes the labels in this screen.
LABEL
Active
Select this check box to activate bandwidth control.
Port
This field displays the port number.
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Bandwidth Control
specified destination(s) using the Bandwidth Control setup screen.
Figure 11-1 Bandwidth Control
Table 11-1 Bandwidth Control
DESCRIPTION
Dimension GS-3012 Gigabit Ethernet Switch
Chapter 11
Bandwidth Control
11-1