9.1 Introduction to Filtering
Filtering means sifting traffic going through the switch based on the source and/or destination MAC addresses and
VLAN group (ID).
9.2 Configuring a Filtering Rule
Click Advanced Application and Filtering to display the screen as shown next.
The following table describes the related labels in this screen.
LABEL
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Name
Type a descriptive name for this filter rule. This is for identification purpose only.
Filtering
Dimension GS-3012 Gigabit Ethernet Switch
This chapter discusses static IP and MAC address port filtering.
Figure 9-1 Filtering
Table 9-1 Filtering
DESCRIPTION
Chapter 9
Filtering
9-1