Figure 14-3 Link Aggregation: Configuration; Table 14-2 Link Aggregation: Configuration - ZyXEL Communications Dimension GS-3012 User Manual

Dimension GS-3012 Gigabit Ethernet Switch
The following table describes the labels in this screen.
LABEL
Link Aggregation Control Protocol
Active Select this checkbox to enable Link Aggregation Control Protocol (LACP).
System Priority LACP system priority is a number between 1 and 65, 535. The switch with the lowest system
priority (and lowest port number if system priority is the same) becomes the LACP "server". The
LACP "server" controls the operation of LACP setup. Enter a number to set the priority of an
active port using Link Aggregate Control Protocol (LACP). The smaller the number, the higher
the priority level.
Group ID The field identifies the link aggregation group, that is, one logical link containing multiple ports
Active Select this option to activate a trunk group.
14-4

Figure 14-3 Link Aggregation: Configuration

Table 14-2 Link Aggregation: Configuration

DESCRIPTION
Link Aggregation